manualshive.com logo in svg

D-Link DSL-522T, Руководство пользователя, Страница: 32 / 92

Поделиться
Скачать
D-Link DSL-522T Скачать руководство пользователя страница 32

DSL-522T ADSL Router User Guide

 

Additional settings for Dynamic IP Address connections: 

Dynamic IP Parameters 

Description 

Connection Type 

This specifies the connection type and encapsulation method used for your 
Dynamic IP Address connection. The options available are 

Bridged IP LLC 

or 

Bridged IP VC-Mux

.  

Cloned MAC Address 

This is not always necessary, but may be required for some ISPs. Type in 
the MAC address of your computer’s Ethernet adapter in the Cloned MAC 
Address field and click the 

Clone MAC Address

 button. This will copy the 

information to a file used by the Router to present to the ISP’s server used 
for DHCP. Some ISPs record the unique MAC address of your computer’s 
Ethernet adapter when you first access their network. If you want to later 
replace the cloned MAC address with the factory default setting, type in all 
zeros - 0:0:0:0:0:0 - and click the 

Clone MAC Address

 button. 

Cloned MAC Address 

To clone the MAC address of your computer’s Ethernet adapter, type in the 
MAC address in the Cloned MAC Address field and then click this 

Clone 

MAC Address

 button. 

MTU 

The Maximum Transmission Unit size may be changed if you want to 
optimize efficiency for uploading data through the WAN interface. The 
default setting (1400 bytes) should be suitable for most users. Some user 
may want to adjust the setting to optimize performance for wireless traffic or 
when low latency is desired (such as with Internet gaming). It is highly 
recommended that the user research how adjusting the MTU may affect 
network traffic for better or worse.  

NAT 

Network Address Translation may be enabled or disabled with the pull-
down menu. Keep in mind that disabling NAT allows only a single computer 
to be used for Internet access through the Router. NAT is enabled and 
disabled for the Router on all connections (i.e. Pvc0 – Pvc7) if your Router 
is set up for multiple virtual connections. 

Firewall 

Use this to universally enable or disable the Firewall and Filter features 
available in the Router. If you disable this you will not be able to configure 
settings in the 

Firewall Configuration

 window or 

Filters

 windows in the 

Advanced

 directory. 

 

22

Содержание DSL-522T





























































































Отзывы:

Нет отзывов