D-Link DSL-522T Скачать руководство пользователя страница 29 | Manualshive

Страница: 29 / 92

D-Link DSL-522T Скачать руководство пользователя страница 29

DSL-522T ADSL Router User Guide

connection software requires the user to enter the User Name and Password for the ISP account. This
information is stored on the computer, not in the Router.

Follow the instructions below to configure a Bridged connection for the WAN interface.

To configure a Dynamic IP Address connection, perform the steps listed below. Some of the settings do not
need to be changed the first time the device is set up, but can be changed later if you choose. See the table
below for a description of all the settings available in this window.

1. Choose

the

Bridge Mode

option from the

WAN Settings

pull-down menu.

2. Under

the

ATM VC Settings

at the top of the window should not be changed unless you have been

instructed to change them. However, if you are instructed to change the

VPI

or

VCI

values, type in

the values assigned for your account. Leave the

PVC

and

Virtual Circuit

setting at the default (

Pcv0

and

Enabled

) values for now. This can be used later if you are configuring multiple virtual circuits for

your ADSL service. For more information, see the section on ATM VC Settings later in this manual.

3. Under the

Bridge Mode

heading, choose the

Connection Type

from the pull-down menu. This

defines both the connection type and encapsulation method used for your ADSL service. The
available options are

1483 Bridged IP LLC

and

1483 Bridged IP VC-Mux.

If have not been provided

specific information for the Connection Type setting, leave the default setting.

4. Most users will not need to change

ATM

settings. If this is the first time you are setting up the ADSL

connection it is recommended that you leave the

Service Category

settings at the default values

until you have established the connection. See the section on ATM Traffic Shaping later in this
manual for a further description of the parameters available for ATM traffic shaping.

5. When you are satisfied that all the WAN settings are configured correctly, click on the

Apply

button.

6. The new settings must be saved and the Router must be restarted for the settings to go into effect.

To save and reboot the Router, click on the

Tools

directory tab and then click the

System

button. In

the

System Settings

window, click the

Save and

Reboot

button under Save Settings and Reboot

the System.

7. Click

OK

when the following “Save and restart?” dialog box opens.

8. The Router will save the new settings and restart. Upon restarting the Router will automatically

establish the WAN connection.

19

«
...
27
28
29
30
31
...
»

Содержание DSL-522T





























































































Отзывы:

Нет отзывов