D-Link DSL-504T Скачать руководство пользователя страница 59 | Manualshive

Страница: 59 / 115

background image

DSL-504T DSL Router User’s Guide

51

DNS

The Router can be configured to relay DNS from your ISP or another available service to workstations on
your LAN. When using DNS relay, the Router will accept DNS requests from hosts on the LAN and forward

them to the ISP (or alternative) DNS servers. DNS relay can use auto discovery or the DNS IP address

can be manually entered by the user. Alternatively, you may also disable the DNS relay and configure

hosts on your LAN to use DNS servers directly. Most users who are using the Router for DHCP service on
the LAN and are using DNS servers on the ISP’s network, will leave DNS relay enabled (either auto

discovery of user configured).

DNS Configuration menu

In the DNS Selection pull-down menu, choose to Use Auto Discovered DNS Server Only, Use User

Discovered DNS server Only, or Disable DNS Relay.

If you have not been given specific DNS server IP addresses or if the Router is not pre-configured with

DNS server information, select the Auto Discover option for DNS relay. Auto discovery DNS instructs the
Router to automatically obtain the DNS IP address from the ISP through DHCP. If your WAN connection

uses a Static IP address, auto discovery for DNS cannot be used.

If you have DNS IP addresses provided by your ISP, enter these IP addresses in the available entry fields

for the Preferred DNS Server and the Alternative DNS Server.

If you choose to Disable DNS Relay, it will be necessary to configure DNS settings for hosts on the LAN

since they will not be depending on the Router to forward the DNS requests.

When you have configured the DNS settings as desired, click the Apply button.

Note

To use DNS Relay for computers on your local network, DNS Service Filtering must be disabled. See the
Firewall section in the next chapter.

«
...
57
58
59
60
61
...
»

Содержание DSL-504T




















































































































Отзывы:

Нет отзывов

Похожие инструкции для DSL-504T

Бренд: Vanderbilt Страницы: 6

Sunrise Internet Box

Бренд: SAGEMCOM Страницы: 2

CN3100-PS-2500-900-1-EXT

Бренд: xG Technology Страницы: 35

Бренд: Westermo Страницы: 21

Бренд: Teledyne Страницы: 2

COR IBR1100 series

Бренд: Cradlepoint Страницы: 161

BB Trio Modem 26M

Бренд: Yahoo! Страницы: 6

HomeConnect 3CR29223

Бренд: 3Com Страницы: 1

Impact External ISDN Modem

Бренд: 3Com Страницы: 6

Бренд: B&B Electronics Страницы: 2

EZ Connect SMC8414-2P-SIP

Бренд: SMC Networks Страницы: 2

DGFV338 - ProSafe Wireless ADSL Modem VPN Firewall Router

Бренд: NETGEAR Страницы: 2

Бренд: Embedded Planet Страницы: 48

3C892 - OfficeConnect ISDN Lan Modem Router

Бренд: 3Com Страницы: 132

Бренд: Zte Страницы: 10

Бренд: Zte Страницы: 9

Бренд: Eurotops Страницы: 16

Бренд: D-Link Страницы: 5

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды