D-Link DSL-502G Скачать руководство пользователя страница 14

Страница: 14 / 73

DSL-502T ADSL Router User’s Guide

Front Panel Display

Place the Router in a location that permits an easy view of the LED indicators on the front panel.

The LED indicators on the front panel include the Power, Status, ADSL Link/Act, Ethernet

Link/Act, and USB Link/Act indicators. The ADSL, Ethernet, and USB indicators monitor link

status and activity (Link/Act).

Power

Steady green light indicates the unit is powered on. When the device is

powered off this remains dark.

Status

Lights steady green during power on self-test (POST). Once the
connection status has been settled, the light will blink green. If the

indicator lights steady green after the POST, the system has failed and

the device should be rebooted.

ADSL: Link/Act

Steady green light indicates a valid ADSL connection. This will light after
the ADSL negotiation process has been settled. A blinking green light

indicates activity on the WAN (ADSL) interface.

Ethernet: Link/Act

A solid green light indicates a valid link on startup. This light will blink

when there is activity currently passing through the Ethernet port.

USB: Link/Act

Steady green light indicates a valid USB connection. A blinking green

light indicates activity on the USB interface.

Содержание DSL-502G










































































Результаты поиска

Содержание DSL-502G

Отзывы:

Бренды по названию

Популярные бренды

D-Link DSL-502G, Руководство пользователя

Результаты поиска

Содержание DSL-502G

Отзывы:

Бренды по названию

Популярные бренды