65
D-Link DSL-3782 User Manual
Section 4 - Configuration
System Settings
This page allows you to save the router’s current configuration, load a
previously saved configuration, reset the router to its factory default settings,
or reboot the router. To access this page, click
System Settings
from the
Management
menu on the bar on the top of the page.
Device Information
Hardware Version:
The hardware version of the router is displayed here.
Firmware Version:
The current firmware version is displayed here.
System
Save and Reboot
The Device:
Click to reboot the router.
Restore To Factory
Default Settings:
This option will restore all configuration settings back to the settings that
were in effect at the time the router was shipped from the factory. Any
settings that have not been saved will be lost, including any rules that
you have created. If you want to save the current router configuration
settings, use the
Save Settings To Local Hard Drive
button below.
Save Settings To
Local Hard Drive:
This option will save the current router configuration settings to a file
on your computer.
Load Settings
From Local Hard
Drive:
This option will load a previously saved router configuration file. This will
overwrite the router’s current configuration.
