D-Link DSL-2870B Dual Band Wireless N750 Gigabit ADSL2+ Modem Router User Manual
Web User Interface Configuration
Page 89
Basic Rate:
Select the basic wireless rate used here.
Fragmentation Threshold:
Enter the fragmentation threshold value used here.
RTS Threshold:
Enter the RTS threshold value used here.
DTIM Interval:
Enter the DTIM Interval value used here.
Beacon Interval:
Enter the beacon interval value used here.
Global Max Clients:
Enter the maximum global wireless client value used here.
XPress™ Technology:
Select the XPress™ technology state here. Options to
choose from are
Enabled
and
Disabled
.
Regulatory Mode:
Select the regulatory mode state here. Options to choose from
are
Disabled
,
802.11h
, and
802.11d
.
Pre-Network Radar Check:
Enter the pre-network radar check value used here.
This option is only available after the
802.11h
regulatory mode was selected.
In-Network Radar Check:
Enter the in-network radar check value used here. This
option is only available after the
802.11h
regulatory mode was selected.
TPC Mitigation (db):
Select the TPC mitigation value used here. Options to choose from are
0 (off)
,
2
,
3
, and
4
. This option is only available after the
802.11h
regulatory
mode was selected.
Transmit Power:
Select the transmit power value used here.
WMM (Wi-Fi Multimedia):
Select the WMM (Wi-Fi Multimedia) state here. Options
to choose from are
Auto
,
Enabled
and
Disabled
.
WMM No Acknowledgement:
Select the WMM No Acknowledgement state here.
Options to choose from are
Enabled
and
Disabled
.
WMM APSD:
Select the WMM APSD state here. Options to choose from are
Enabled
and
Disabled
.
In this section we can configure the settings for the
Guest/Virtual Access Point-1
.
Parameters available for configuration are:
Enable Wireless Guest Network:
Here we can enable or disable the wireless
guest network number 1.
Wireless Network Name (SSID):
Here we can enter the wireless network name
(SSID) for the virtual access point 1.
Hide Wireless Network:
Here we can enable or disable the option to hide the wireless network name of the virtual access point 1.
Client Isolation:
Here we can enable or disable the client isolation feature for virtual access point 1.
