D-Link DSL-2870B Скачать руководство пользователя страница 30

Страница: 30 / 184

D-Link DSL-2870B Dual Band Wireless N750 Gigabit ADSL2+ Modem Router User Manual

Web User Interface Configuration

Page 30

After clicking the

Add

button, the following page will be available. This screen allows

the user to configure the ETH and PTM/ATM service settings.

PPP over Ethernet (PPPoE)

In the

WAN Service Configuration

section we can select the

WAN Service Type

used for this entry. Options to choose from are

PPP over Ethernet (PPPoE)

IP over

Ethernet

Bridging

PPP over ATM (PPPoA)

, and

IP over ATM (IPoA)

The information on the rest of this page will change depending on what type of WAN
service connection has been made.

After selecting the

PPP over Ethernet (PPPoE)

option, the following information will

be available.

In this section we can configure the following parameters.

ATM Service:

Select the ATM Service option available here.

PPP Username:

Enter the PPPoE username used here.

PPP Password:

Enter the PPPoE password used here.

Service Name:

Enter the PPPoE service name used here.

Authentication Method:

Select the authentication method used for this interface.

Options to choose from are

AUTO

PAP

CHAP

, and

MSCHAP

NAT:

Select this option to enable or disable the NAT option.

Fullcone NAT:

Select this option to enable or disable the Fullcone NAT option.

Firewall:

Select this option enable or disable the firewall for this interface.

Dial on Demand with Idle Timeout Timer:

Select this option to enable or disable

dial on demand.

Inactivity Timeout (Minutes):

After selecting the

Dial on demand

option, this

parameter becomes available. Enter the inactivity timeout value used here.

PPP IP extension:

Select this option to enable or disable the PPP IP extension

option.

Use Static IPv4 Address:

Select this option to enable or disable the use of static IPv4 addresses.

Содержание DSL-2870B

























































































































































































Результаты поиска

Содержание DSL-2870B

Отзывы:

Похожие инструкции для DSL-2870B

Бренды по названию

Популярные бренды

D-Link DSL-2870B, Руководство пользователя

Результаты поиска

Содержание DSL-2870B

Отзывы:

Похожие инструкции для DSL-2870B

Бренды по названию

Популярные бренды