DSL-2750U
Wireless ADSL2+ Router with 3G/LTE/Ethernet WAN Support
and USB Port
User Manual
Configuring via Web-based Interface
Creating PPPoE or PPPoA WAN Connection
On the connection creation page, go to the
All Settings
tab. Then select the relevant value from
the
Connection Type
drop-down list and specify the needed values.
Figure 62. The page for creating a new
PPPoE
connection. Selecting a connection type.
Parameter
Description
Interface
For the
PPPoE
type only.
A physical interface to which the new connection will be assigned.
In order to create an Ethernet WAN connection, select the value
corresponding to the LAN port specified as the WAN port.
In order to create an ADSL WAN connection, select the value
corresponding to the existing interface or the
Add new ATM PVC
value for creating a new interface at the physical layer.
Enable connection
Move the switch to the right to enable the connection.
Move the switch to the left to disable the connection.
Connection name
Available for the advanced mode only.
A name for the connection for easier identification.
Page
80
of 210