51
D-Link DSL-2740M User Manual
Section 3 - Configuration
Outbound Filter
Click
Outbound Filter
on the navigation menu to configure the Outbound Filter. The
Outbound Filter allows you to place filtering rules on a per IP basis. Using this tool you may
restrict access to or block traffic to a specific remote IP address or range.
The currently defined Outbound Filter rules are listed here. Click
Remove
to remove a
defined rule.
ACTIVE OUTBOUND FILTER
Filter Name:
Enter a name for this Outbound Filter.
Protocol:
Select
TCP
,
UDP
, or
ICMP
from the dropdown menu.
Source IP address:
Enter the source IP address.
Source Subnet
Mask:
Enter the source subnet mask.
Source Port:
Enter the source port.
Destination IP
address:
Enter the destination IP address.
Destination Subnet
Mask:
Enter the destination subnet mask.
Destination Port:
Enter the destination port.
Click the
Add/Apply
button to add your Outbound IP Filter Rule.
ADD OUTBOUND IP FILTER
