D-Link DSL-2640R Скачать руководство пользователя страница 10 | Manualshive

Страница: 10 / 62

background image

Installation Overview

D-Link DSL-2640R User Manual

Information you will need from your ADSL service provider

Username

This is the Username used to log on to your ADSL service provider’s network. Your ADSL service provider uses this to identify your account.

Password

This is the Password used, in conjunction with the Username above, to log on to your ADSL service provider’s network. This is used to verify the identity of your account.

WAN Setting / Connection Type

These settings describe the method your ADSL service provider uses to transport data between the Internet and your computer. Most users will use the default settings. You may
need to specify one of the following WAN Setting and Connection Type configurations (Connection Type settings listed in parenthesis):

•

PPPoE/PPPoA (PPPoE LLC, PPPoE VC-Mux, PPPoA LLC or PPPoA VC-Mux)

•

Dynamic IP Address (1483 Bridged IP LLC, 1483 Bridged IP VC-Mux)

•

Static IP Address (1483 Bridged IP LLC, 1483 Bridged IP VC-Mux, 1483 Routed IP LLC(IPoA) or 1483 Routed IP VC-Mux)

•

Bridge Mode (1483 Bridged IP LLC or 1483 Bridged IP VC Mux)

Modulation Type

ADSL uses various standardized modulation techniques to transmit data over the allotted signal frequencies. Some users may need to change the type of modulation used for
their service. The default DSL modulation (Auto Synch-Up) used for the Router automatically detects all types of ADSL, ADSL2, and ADSL2+ modulation.

Security Protocol

This is the method your ADSL service provider will use to verify your Username and Password when you log on to their network. Your Router supports the PAP and CHAP
protocols.

VPI

Most users will not be required to change this setting. The Virtual Path Identifier (VPI) is used in conjunction with the Virtual Channel Identifier (VCI) to identify the data path
between your ADSL service provider’s network and your computer. If you are setting up the Router for multiple virtual connections, you will need to configure the VPI and VCI as
instructed by your ADSL service provider for the additional connections. This setting can be changed in the WAN Settings window of the web management interface.

VCI

Most users will not be required to change this setting. The Virtual Channel Identifier (VCI) used in conjunction with the VPI to identify the data path between your ADSL service
provider’s network and your computer. If you are setting up the Router for multiple virtual connections, you will need to configure the VPI and VCI as instructed by your ADSL
service provider for the additional connections. This setting can be changed in the WAN Settings window of the web management interface.

7

«
...
8
9
10
11
12
...
»

Содержание DSL-2640R































































Отзывы:

Нет отзывов

Похожие инструкции для DSL-2640R

Бренд: Tandy Страницы: 16

Бренд: THOMSON Страницы: 46

Merlin for GPRS G201

Бренд: Novatel Страницы: 54

Бренд: Cradlepoint Страницы: 137

Skywire LTE CAT1

Бренд: NimbeLink Страницы: 25

Fritzbox 6660 Cable

Бренд: Fritz! Страницы: 12

Бренд: RCA Страницы: 35

Бренд: SmartRG Страницы: 63

Бренд: NETGEAR Страницы: 175

Бренд: Hughes Страницы: 29

Бренд: Terayon Страницы: 68

TFM-560U - DATA SHEETS

Бренд: TRENDnet Страницы: 20

Бренд: US Robotics Страницы: 151

Бренд: Zte Страницы: 24

Бренд: Trust Страницы: 13

Бренд: Galaxy Страницы: 8

Бренд: XMODUS Страницы: 32

Бренд: Zhone Страницы: 48

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды