D-Link DSL-2540B - ADSL2/2+ Modem With EN Router, Быстрая установка

Страница: 10 / 12

10 D-Link DSL-540B Quick Install Guide
7. If prompted to restart your computer with the new settings, click
OK
.
8. After your computer restarts, click on the
Network and Dial-up
Connections
icon again, and right click on the
Local Area
Connection
icon and then select
Properties
.
9. In the Local Area Connection Properties dialog box, select
Internet Protocol (TCP/IP) and then click on Properties .
10. In the Internet Protocol (TCP/IP) Properties dialog box, click in
the radio button labeled Use the following IP address and type
192.168.1.x (where “x” is any number between 2 and 254) and
255.255.255.0 in the IP address field and Subnet Mask field.
11. Click
OK
twice to save your changes and then close the Control
Panel.
Windows
®
XP
1. In the Windows taskbar, click on the Start button then go to
Control Panel
and then click
Network Connections
.
2. In the Network Connections window, right click on the Local
Area Connection
icon and click on
Properties
.
3. Listed in the Local Area Connection window are the installed
network components. Make sure the box for Internet Protocol
(TCP/IP) is checked and then click on
Properties
.
4. In the Internet Protocol (TCP/IP) Properties dialog box, click on
the radio button labeled
Use the following IP address
and type
192.168.1.x(where x is any number between 2 and 254) for the
IP address field and 255.255.255.0 for the Subnet Mask field.
5. Click on OK twice to save your changes and then close the Control
Panel.