95
D-Link DSL-245GE User Manual
Section 6 - Connecting to a Wireless Network
Connect a Wireless Client to Your Router
WPS Button
Step 2
- Within 2 minutes, press the WPS button on your wireless device (or launch the software utility and start the WPS
process).
The easiest way to connect your wireless devices to the router is with WPS (Wi-Fi Protected Setup). Most wireless devices such
as wireless adapters, media players, Blu-ray DVD players, wireless printers and cameras have a WPS button (or a software utility
with WPS) that you can press to connect to the DSL-245GE. Please refer to your user manual for the wireless device you want to
connect to make sure you understand how to enable WPS. Once you know, follow the steps below:
Step 1
- Press the WPS button on the DSL-245GE for about 5 seconds. The WPS LED on the front panel will start to blink.
Step 3
- Allow up to 1 minute for your connection to be configured. Once the WPS LED stops blinking, you will be connected
using WPA2 encryption.
WPS Button