55
D-Link DSL-245GE User Manual
Section 4 - Configuration
DHCP IP
Address Range:
Specify the start and end IP addresses for the range of addresses to
be assigned by your router.
DHCP Lease Time:
Select the DHCP lease time from the drop down menu:
1 Hour, 2
Hours, 3 Hours, 1 Day, 2 Days, 3 Days,
or
1 Week
. The default is
1
Day
.
DNS:
The Domain Name System (DNS) translates domain or website names
into Internet addresses or URLs. Enter the DNS server's IP address.
DNS2:
Enter the secondary DNS server's IP address.
Option60 Vendor
ID:
Enter Option 60 information here to be included in the DHCP request
communication.
DHCP Relay:
Select this option to enable DHCP Relay. Use this if you have a
dedicated DHCP server on your network, then enter the server IP
address.
Click
Save
when you are done.
LAN IPv6 Settings
IPv6 Enable:
Enable or disable the IPv6 addressing scheme for the local network.
Config Mode:
Select either SLAAC (stateless configuration) or DHCPv6 (stateful
configuration).
Prefix Select:
Select the prefix assignment method:
Auto
,
Manual
, or a
Service
Number
of the WAN Interface to use for the IPv6 prefix setting.
If you selected
Auto
, configure the following settings for DNS:
DNS Select:
Configure the mode of DNS:
Auto
, a
Service Number
of the WAN
Interface or
Manual
and enter the DNS server information manually
below.
Network - Advanced Settings
