DRO-210i Web Configuration
DRO-210i User Manual Page 3-3
Saving all of this information to the DRO-210i's flash and restarting it will
make this IP addressing scheme current. In Windows, when the user
enables DHCP on the NIC he/she will obtain an IP address automatically,
upon restarting the computer(s) connected on the LAN side of the Router.
User’s computer(s) will automatically be assigned an IP address (es) from
the range 192.168.100.2 to 192.168.100.100. As an alternative, user could
disable the DHCP server and manually update the IP address, subnet mask
and default gateway information for each computer on the LAN side.
It is recommended that if user needs to change the IP addressing scheme
for the Router, he/she can configure its DHCP server with the appropriate
IP address range and subnet mask, and then assign an IP address from the
same range. This way, a computer on the LAN side of network can always
get the proper network addressing information by DHCP from the Router
simply by being restarted.
Click on
Interface > LAN
to get the web page as shown below:
