D-Link DQS-5000-32Q28, Быстрое руководство по установке

Страница: 3 / 17

did not boot up normally.
Link/Activity/Speed
(per optical port) Solid green There is a secure 100 Gbps connection at the port.
Blinking green There is reception or transmission occuring at the port.
Solid amber There is a secure 40 Gbps connection at the port.
Blinking amber There is reception or transmission occuring at the port.
Light off No link.
Link/Activity (per RJ-
45 port) Solid green There is a secure 1000 Mbps connection at the port.
Blinking green There is reception or transmission occuring at the port.
Solid amber There is a secure 10/100 Mbps connection at the port
Blinking amber There is reception or transmission occuring at the port.
Light off No link.
Installation Guidelines
This section will discuss the hardware installation guidelines that the user must follow in
order to properly and safely install this switch into the appropriate environment.

Visually inspect the power cord and see that it is fully secured to both the power
connector, on the switch, and the electrical outlet that supplies power.

Install the switch in a fairly cool and dry place within the acceptable operating
temperature and humidity ranges.

Install the switch in a site free from strong electromagnetic field generators such as
motors, vibration, dust, and direct exposure to sunlight.
Installing the Switch without a Rack
When installing the switch on a desktop or shelf, the rubber feet included with the device
must be attached on the bottom at each corner of the device’s base.
Figure 1 — Attaching rubber feet to the switch
Install the switch on a sturdy, level surface that can support the weight of the switch. Do
not place any heavy objects on the switch. Make sure that there is proper heat dissipation
from and adequate ventilation around the switch. Leave at least 10 cm (4 inches) of space
at the front, sides, and rear of the switch for ventilation.
Installing the Switch in a Standard 19'' Rack
The switch can be mounted in a standard 19"(1U) rack using the provided mounting
brackets. Fasten the mounting brackets to the sides of the switch using the screws
provided.
3