D-Link DQS-5000-32Q28, Быстрое руководство по установке

Страница: 2 / 17

Package Contents
Open the shipping carton of the switch and carefully unpack its contents. Please consult
the packing list to make sure all items are present and undamaged. If any item is missing
or damaged, please contact your local reseller for replacement.

One DQS-5000-32Q28 switch

Two AC power cords

One console cable (RJ-45 to RS-232)

One rack mounting kit (two brackets and screws)

Four rubber feet with adhesive backing

One Quick Installation Guide
Note: the model you have purchased may appear slightly different from those shown in the
illustrations.
Device Interfaces
Model Port Description
DQS-5000-32Q28 100GBase-X QSFP28
ports
32 QSFP28 ports (100 Gbps connection speed).
USB 2.0 port USB 2.0 Type-A port for connecting a USB storage
device.
RJ-45 console port RJ-45 console port for connecting to a PC with a RJ-45
console cable (included in the package). The Command
Line Interface (CLI) is used for configuring the switch.
10/100/1000Base-T RJ-45
management port Out-of-band management port for configuring the switch
without being connected to the network (10/100/1000
Mbps connection speed).
LEDs
LED Status Description
PSU 1 Solid green The switch is powered on and functioning normally.
Solid amber The switch’s power supply has failed or is not working properly.
Light off The switch is turned off.
PSU 2 Solid green The switch is powered on and functioning normally.
Solid amber The switch’s power supply has failed or is not working properly.
Light off The switch is turned off.
FAN Solid green The fans are operating normally.
Solid amber A fan has failed. Check the FAN Status LED on the rear panel to
identify which fan is malfunctioning.
Light off The fans are powered off.
STAT Solid green The diagnostic test was successfully completed.
Solid amber The self-diagnostics system has detected a fault.
Light off The system is down, the switch is booting up, or the network OS
2