D-Link DPR-1040, Руководство пользователя

Страница: 30 / 130

Using PS Software
D-Link DPR-1040 User Manual 26
Installing and Using MFP/GDI Printers
This section will tell you how to install a MFP/GDI printer through the PS-Link utility.
This is helpful when you do not have physical access to the printer.
For PCs with the MFP/GDI printer driver installed:
If your computer already has the MFP/ GDI printer driver installed, you can just click
the [
Link
] button in
PS-Link
to complete the connection between the printer and
your computer.
For PCs without the MFP/GDI printer driver installed:
If your computer does not have the MFP/GDI printer driver installed, you may use
the following procedure:
1. Insert the DPR-1040 installation CD into your computer’s CD-ROM drive to install
the PS-Link software.
2. Insert the manufacturer’s CD-ROM into your computer’s CD-ROM drive to initiate
the auto-run program.
3. Following the instructions on the manufacturer’s installation CD to install the MFP
driver and other software until you are requested to attach the printer’s USB cable
to your computer. At this stage you must use the PS Link utility to simulate the
connection and complete the installation.
3. The installation steps may be different depending on the printer and manufacturer
brand. Below you will find diagrams for several printers from different
manufacturers.