DPN-124G
Quick Installation Guide
Configuring Connection to the Internet
!
When the gateway connects to a fiber optic line, a WAN connection is
created and configured automatically.
When the gateway connects to an Ethernet line or a mobile network,
you should configure your WAN connection
in accordance with data
provided by your Internet service provider (ISP). Make sure that you
have obtained all necessary information prior to configuring your
connection. Otherwise contact your ISP.
LTE WAN Connection
If the PIN code check is enabled for the SIM card inserted into your USB
modem, then prior to creating an LTE WAN connection, go to the
USB
Modem / PIN
page and enter the PIN code.
If the PIN code check for the SIM card inserted into your USB modem is
disabled, an active LTE WAN connection will be automatically created on the
Connections Setup / WAN
page when connecting a USB modem to the
gateway. If the connection has not been created automatically, create a new
connection manually.
!
For the USB modem Megafon M100-1, please reboot the gateway after
creating the WAN connection.
1.
Go to the
Connections Setup / WAN
page.
2.
Click the
ADD
button.
3. On the opened page, on the
All Settings
tab, select the
LTE
value from
the
Connection type
drop-down list.
* For correct operation of USB modems you may need to update the gateway's
firmware.
19
