D-Link DMF-560TX, Руководство пользователя

Страница: 29 / 52

4 DRIVERS INFORMATION
3-3
Stop bits: 1
Flow Control: Hardware
Click K” when finished. After you have done this,
save your new connection by selecting ave” from
the ile” menu then click K.” A new connection
icon will be added to your Hyper Terminal folder.
You are now ready to start entering AT commands.
In the terminal window, type:
AT<Enter>
LANmodem responds
OK
This confirms that the modem and your computer are
communicating correctly.
To test the telephone line connection, issue the
manual answer command. Type:
ATA<Enter>
The LANmodem will pick up the phone line, and try
to communicate. Normally, this command is only
used to answer an incoming call made from another
modem. Thus the high pitched noise you will hear
from the speaker. To abort the operation, press any
key, or select isconnect” from the all” menu.
3.2 Dialing and Answering Techniques
Depending on what communications software you
use to make modem connections, you may not have
much control of how the modem dials the telephone
number. This section shows some useful examples of
the AT commands used for dialing and answering
operations. The command characters specific to each
function are shown in bold type.
Dialing using the ATD Command