DKVM-410H
2
E
N
G
LIS
H
The DKVM-410H supports hot-plugging. You don't need to turn your computers off before installing
the device.
Installing the DKVM-410H
Package Contents
4-PORT KVM SWITCH WITH HDMI AND USB PORTS
DKVM-410H
DESKTOP CONTROLLER
If any of these items are missing from your packaging, please contact your reseller.
A. Attach your USB keyboard connector to the console USB Type-A port of the DKVM-410H.
B. Attach your USB mouse connector to the console USB Type-A port of the DKVM-410H.
C. Attach your monitor's HDMI connector to the console HDMI port (HDMI OUT) of the DKVM-410H.
The following steps below apply to each computer that you are using with your DKVM-410H.
D. Attach the KVM cable (HDMI connector) to the HDMI port of the DKVM-410H.
E. Attach the KVM cable (USB Type-B connector) to the USB Type-B port of the DKVM-410H.
Installation of the DKVM-410H is now complete.
QUICK INSTALLATION GUIDE
1.5 M LENGTH KVM CABLE WITH HDMI AND USB (x2)
CONNECT THE DKVM-410H TO YOUR COMPUTERS
F. Attach the KVM cable (HDMI connector) to the HDMI port located on the back of your computer
case.
G. Attach the KVM cable (USB Type-A connector) to the USB Type-A port located on the back
of your computer case.
