D-Link DIS-200G-12S, Руководство по установке оборудования

Страница: 16 / 47

DIS-200G Series Layer 2 Gigabit Industrial Smart Managed Switch Hardware Installation Guide
16
Installing the Switch into a Rack
The DIS-200G switch can be mounted in a standard 19” server rack by using the included rack mounting brackets
(optional).
Use the following instructions to mount the DIS-200G switch on a wall using the screw hooks on the underneath of the
switch
1. Attach the included mounting brackets to each side of the switch using the provided screws.
Figure 2-3 Attaching rack-mount brackets to the Switch
2. Use the screws that were provided with the rack to install the switch in the rack.
Figure 2-4 Installing the Switch in a Rack
Make sure that there is adequate space around the switch to allow for proper air flow, ventilation, and cooling.
Grounding the Switch
To use the DIS-200G switch safely, it needs to be grounded. Please complete these steps before powering on the
switch.
Use the following instructions to ground the DIS-200G switch:
1. Remove the grounding screw from the top of the DIS-200G and place the grounding cable lug ring on top of the
grounding screw opening.