58
D-Link DIR-X3260 User Manual
Section 3 - Configuration
5GHz - Advanced Settings...
Security Mode
Choose
None
or
WPA/WPA2-Personal
(recommended).
802.11 Mode (5GHz)
Select the desired wireless networking standards to use.
The available options for the 5 GHz wireless network are
Mixed
802.11a/n/ac/ax, Mixed 802.11a/n/ac, Mixed 802.11n/ac,
Mixed 802.11a/n, 802.11ac only, Mixed 802.11a only,
or
802.11n only
.
Wi-Fi Channel
Select the desired channel. The default is
Auto
(recommended).
DFS Channel
DFS enables you to use more channels to help find one with
the least interference. However, please note that when using
DFS, the router must scan for radar signals for a minute before
using a channel, and will change channels automatically if
radar signals are detected.
Transmission Power
Select the desired wireless transmission power.
Channel Width (5GHz)
Select
Auto 20/40/80
if you are using 802.11ac, 802.11n, and
802.11a devices, select
Auto 20/40
if you are using 802.11n
and 802.11a devices, or select
20 MHz
if you are using 802.11a
devices.
Visibility Status
The default setting is
Visible
. Select
Invisible
if you do not
want to broadcast the SSID of your wireless network.
Schedule
Use the drop-down menu to select the time schedule that
the rule will be enabled for. The schedule may be set to
Always Enable
, or you can create your own schedules in the
Schedules
section. Refer to
Time & Schedule - Schedule
on
page
81
for more information.
