69
D-Link DIR-X3260 User Manual
Section 3 - Configuration
If you clicked on
Edit
or
Add Rule
, the following options will appear:
Name
Enter a name for the rule.
Source IP Address
Range
Enter the source IP address range that the rule will apply to.
Using the drop-down menu, specify whether it is a
WAN
or
LAN
IP address.
Destination IP Address
Range
Enter the destination IP address range that the rule will apply
to. Using the drop-down menu, specify whether it is a
WAN
or
LAN
IP address.
Protocol & Port Range
Select the protocol of the traffic to allow or deny (
Any, TCP,
or UDP
) and then enter the range of ports that the rule will
apply to.
Schedule
Use the drop-down menu to select the time schedule that
the rule will be enabled for. The schedule may be set to
Always Enable
, or you can create your own schedules in the
Schedules
section. Refer to
Time & Schedule - Schedule
on
page
81
for more information.
