DIR-806A
Quick Installation Guide
Selecting Operation Mode
In order to connect your device to a wired ISP, on the
Device mode
page,
from the
Connection method
list, select the
Wired connection
value.
Then from the
Work mode
list select the
Router
value. In this mode you can
configure a WAN connection, set your own settings for the wireless network in
the 2.4GHz and 5GHz bands, configure LAN ports to connect an STB or VoIP
phone, and set your own password for access to the web-based interface of the
device.
In order to connect your device to a wireless ISP (WISP), on the
Device
mode
page, from the
Connection method
list, select the
Wi-Fi
value.
Then from the
Work mode
list select the
WISP Repeater
value. In this
mode you can connect your device to another access point, configure a WAN
connection, set your own settings for the wireless network in the 2.4GHz and
5GHz bands, configure LAN ports to connect an STB or VoIP phone, and set
your own password for access to the web-based interface of the device.
In order to connect your device to a wired router for adding a wireless network
to the existing local network, on the
Device mode
page, from the
Connection method
list, select the
Wired connection
value. Then from
the
Work mode
list select the
Access point
value. In this mode you can
change the LAN IP address, set your own settings for the wireless network in
the 2.4GHz and 5GHz bands and set your own password for access to the web-
based interface of the device.
19
