D-Link DIR-803, Руководство пользователя

Страница: 76 / 159

71 D-Link DIR-803 User Manual
Section 3 - Configuration
Network (MAC) Filters
Select Turn MAC Filtering Off , Allow MAC addresses
listed below , or Deny MAC addresses listed below
from the drop-down menu.
Enter the MAC Address you would like to filter, or
select from the DHCP Client List (see below).
To find the MAC address on a computer, please refer
to the Networking Basics section in this manual.
Devices that have obtained an IP address from the
router’s DHCP server will be in the
DHCP Client List
.
Select a
DHCP Client
from the drop-down menu and
click << to copy that device’s MAC Address.
The schedule may be set to
Always
, which will allow
the filtering to always be enabled. Use the drop-
down menu to select a pre-defined a schedule in the
router. Or, you can click on New Schedule to add one.
Click
Save Settings
.
Configure MAC
Filtering:
MAC Address:
DHCP Client List:
Schedule:
Use MAC (Media Access Control) Filters to allow or deny LAN (Local Area Network) computers by their MAC addresses from
accessing the network. You can either manually add a MAC address or select the MAC address from the list of clients that are
currently connected to the Broadband Router.