DIR-620
Wireless N300 Router with 3G/CDMA/LTE Support
and USB Port
User Manual
Configuring via Web-based Interface
!
When the router is powered off or rebooted, the system time is reset to the default value.
If you have set automatic synchronization for the system time, the internal clock of the
device will be configured after connecting to the Inter
net. If you have set the system time
manually, you need to set the time and date again (see above).
Ping
On the
System / Ping
page, you can check availability of a host from the local or global network
via the Ping utility.
The Ping utility sends echo requests to a specified host and receives echo replies.
Figure 166. The
System / Ping
page.
To check availability of a host, enter the IP address or name of this host in the
Host
field, and select
a number of requests that will be sent in order to check its availability from the
Count of packets
drop-down list. If availability check should be performed with IPv6, select the relevant checkbox.
Click the
Start
button. After a while, the results will be displayed on the page.
Page
215
of 225
