DIR-615
Wireless N300 Router
User Manual
Configuring via Web-based Interface
Remote Update
!
Attention! Do not turn off the router before the firmware upgrade is completed. This may
cause the device breakdown.
To update the firmware of the router remotely, follow the next steps:
1. On the
System / Firmware upgrade
page, in the
Remote update
section, click the
Check for updates
button to check if a newer firmware version exists.
2. Click the
OK
button in the window displayed to upgrade the firmware of the router. Also
you can upgrade the firmware of the router by clicking the
Remote update
button (the
button is displayed if a newer version of the firmware is available).
3. Wait until the router is rebooted (about one and a half or two minutes).
4. Log into the web-based interface using the login (
admin
) and the current password.
After the upgrade is completed, the new version of the firmware will be displayed in the top left
corner of the page.
If after updating the firmware the router doesn't work correctly, please restore the factory default
settings. To do this, place the mouse pointer over the
System
caption in the top left corner of the
page and click the
(
Reset to factory
) icon. Wait until the router is rebooted.
Page
199
of 208
