D-Link DIR-605, Руководство пользователя

Страница: 58 / 102

54 D-Link DIR-605 User Manual
Section 3 - Configuration
Change Password
Remote Management
Enter a new password for the Administrator Login
Name. The administrator can make changes to the
settings.
Enter the new password for the User login. If you
login as the User, you can only see the settings, but
cannot change them.
Remote management allows the DIR-605 to be
configured from the Internet by a web browser. A
username and password is still required to access
the Web-Management interface. In general, only a
member of your network can browse the built-in
web pages to perform Administrator tasks. This
feature enables you to perform Administrator tasks
from the remote (Internet) host.
The port number used to access the DIR-605.
Example: http://x.x.x.x:8080 whereas x.x.x.x is the
Internet IP address of the DIR-605 and 8080 is the
port used for the Web Management interface.
5IJTTFDUJPOXJMMMJTUBOZSVMFTUIBUBSFDSFBUFE:PVNBZDMJDLUIF Edit icon to change the settings or enable/disable the rule, or click
the ADVANCED-Inbound filter web page to configure.
The device supports this function to prevent phishing.
Admin Password:
User Password:
Remote
Management:
Remote Admin
Port:
Inbound Filter:
Enable Graphical
Authentication:
Administrator Settings
5IJT QBHF XJMM BMMPX ZPV UP DIBOHF UIF "ENJOJTUSBUPS BOE 6TFS QBTTXPSET:PV DBO BMTP FOBCMF 3FNPUF .BOBHFNFOU
There are two accounts that can access the management interface through the web browser. The accounts are admin
and user. Admin has read/write access while user has read-only access. User can only view the settings but cannot
make any changes. Only the admin account has the ability to change both admin and user account passwords.