D-Link DIR-605, Руководство пользователя

Страница: 45 / 102

41 D-Link DIR-605 User Manual
Section 3 - Configuration
&OUFS B OBNF GPS UIF SVMF :PV NBZ TFMFDU B
pre-defined application from the drop-down
menu and click <<.
This is the port used to trigger the application. It
can be either a single port or a range of ports.
Select the protocol of the trigger port (TCP,
UDP, or Both).
This is the port number on the Internet side that
XJMM CF VTFE UP BDDFTT UIF BQQMJDBUJPO:PV NBZ
EFGJOF B TJOHMF QPSU PS B SBOHF PG QPSUT:PV
can use a comma to add multiple ports or port
ranges.
Select the protocol of the firewall port (TCP,
UDP, or Both).
Name:
Trigger:
Traffic Type:
Firewall:
Traffic Type:
Application Rules
Some applications require multiple connections, such as Internet gaming, video conferencing, Internet telephony and others.
These applications have difficulties working through NAT (Network Address Translation). Special Applications makes some of
these applications work with the DIR-605. If you need to run applications that require multiple connections, specify the port
normally associated with an application in the “Trigger Port” field, select the protocol type as TCP or UDP, then enter the firewall
(public) ports associated with the trigger port to open them for inbound traffic.
The DIR-605 provides some predefined applications in the table on the bottom of the web page. Select the application you
want to use and enable it.