65
D-Link DIR-604 User Manual
Section 3 - Configuration
Change Password
Remote Management
Enter the login name. The default is
admin
.
Enter a new password for the Administrator
Login Name. The administrator can make
changes to the settings.
Retype the new password for the Administrator
Login Name.
Tick this check box to enable graphical
authentication. The device supports this function
to prevent phishing.
Remote management allows the DIR-604 to be
configured from the Internet by a Web browser.
A username and password is still required to
access the Web Management interface. In
general, only a member of your network can
browse the built-in Web pages to perform
Administrator tasks. This feature enables you to perform Administrator tasks from the remote (Internet) host.
Enter the IP address of the computer on the Internet that you want to have access to the Router. If left blank, any computer
on the Internet can access the Router.
The port number used to access the DIR-604. Example: http://x.x.x.x:8080 whereas x.x.x.x is the Internet IP address of the
DIR-604 and 8080 is the port used for the Web Management interface.
Login Name:
Password:
Confirm
Password:
Enable
Graphical
Authentication:
Enable
Remote
Management:
IP Allowed to
Access:
Port:
Administrator Settings
This page will allow you to change the Administrator and User passwords. You can also enable Remote Management.
There are two accounts that can access the management interface through the Web browser. The accounts are admin
and user. Admin has read/write access while user has read-only access. User can only view the settings but cannot
make any changes. Only the admin account has the ability to change both admin and user account passwords.
