47
D-Link DIR-604 User Manual
Section 3 - Configuration
Choose L2TP (Layer 2 Tunneling Protocol ) if your ISP uses a L2TP connection. Your ISP will provide you with a
username and password. This option is typically used for DSL services.
Manual Internet Configuration (L2TP)
Select
L2TP (Username/Password)
to obtain IP Address
information automatically from your ISP.
Select
Static IP
if your ISP assigned you the IP address,
subnet mask, gateway, and DNS server addresses. In most
cases, users will select
Dynamic IP (DHCP)
.
Enter the IP address (Static L2TP only).
Enter the subnet mask (Static L2TP only).
Enter the gateway IP address provided by your ISP.
Enter the primary DNS server Address (Static L2TP only).
The default MAC address is set to the Internet port’s physical
interface MAC address on the broadband Router. It is not
recommended that you change the default MAC address
unless required by your ISP. You can use the
Copy Your
PC’s MAC Address
button to replace the Internet port’s MAC
address with the MAC address of your Ethernet card.
Enter the server IP address provided by your ISP (optional).
Enter your L2TP user name.
My Internet
Connection is:
Address Mode:
L2TP IP
Address:
L2TP Subnet
Mask:
L2TP Gateway
IP Address:
Primary DNS
Server:
MAC Address:
L2TP Server IP
Address:
User Name:
