123
D-Link DIR-508L User Manual
Section 7 - Troubleshooting
To recover your device:
• Connect an Ethernet cable from the router to your computer.
• Open a web browser and enter the IP of your router (http://
dlinkrouter or http://dlinkrouter.local. or 192.168.0.1) and
press
Enter
.
• The page will show D-link Router Recovery Mode. Click
Browse
to select your current or a newer firmware.
• Click
Open
to load it.
• Click
Upgrade
.
• When the screen shows “Upgrade Successfully”, unplug the
Ethernet cable and power off and on the device.
• Please refer to “Connecting to Your DIR-508L” on page 13 to
setup your router.
4..What.happens.if.the.power.is.cut.during.firmware.upgrade?
.
If you can’t connect to your device or are having a problem connecting to the admin page, your router may be in recovery
mode. This is indicated by a steady blinking orange Power/Status LED.