D-Link Technical
Support – How to setup an IPSec VPN connection between a DIR-130 and DI-80xHV
Page
6
of
10
Step 3:
Click on
More
under
Method
and configure as followed:
Tunnel Name:
the name of the tunnel should already be entered if done in the previous step
•
Local Subnet:
enter the local subnet (
192.168.0.0
in this example)
•
Local Netmask:
enter the local subnet mask(
255.255.255.0
in this example)
•
Remote Subnet:
enter the remote subnet (
192.168.1.0
in this example)
•
Remote Netmask:
enter the remote subnet mask(
255.255.255.0
in this example)
•
Remote Gateway:
enter the remote gateway (
172.68.140.140
in this example)
•
IKE Keep Alive (Ping IP Address):
enter an IP address of a client on the remote side
(
192.168.1.100
in this example)
•
Preshare Key:
enter preshare key as desired (
Pre-share key
must match remote side)
•
IPSec NAT Traversal:
check to enable
•
Auto-reconnect:
check to enable
Click
Apply
to save the settings and click
Continue
when prompted.
