D-Link Technical
Support – How to setup an IPSec VPN connection between a DIR-130 and DI-80xHV
Page
3
of
10
Step 3:
Configure the
IPSec VPN
as followed:
IPSEC SETTING
•
Enable:
check box to enable
•
Name:
enter a name for the VPN
•
Encapsulation Mode::
Tunnel
•
Remote IP:
select Site to Site and enter the remote gateway
•
Remote Local LAN Net /Mask:
enter the remote network and remote subnet mask
Authentication:
enter a Pre-shared Key (Pre-share key must match remote side)
PHASE 1
•
IKE Proposal List:
leave at default (
3DES, SHA1
)
PHASE 2
•
IPSec Proposal List:
leave at default (
3DES, SHA1
)
Click
Save Settings
.
