42
Performing a Factory Reset
Follow these steps to perform a Factory Reset using the Reset button
on the back of the DI-804.
1.
With the unit off, press and hold the Reset button with a pen or
paper clip and turn the unit on.
2.
Hold the reset button for about 5 or 6 seconds until the Power/Test
LED on the front panel blinks very quickly and then release.
3.
Wait a few seconds for the Broadband Router to reboot using
default settings.
A Factory Reset can also be performed through the web configuration
interface. Follow these steps to perform a factory reset using the web
configuration interface.
1.
Log-in to the DI-711 web configuration interface.
2.
Click on the System Management link at the bottom of the
screen.
3. Click
on
Restore Default Settings.
4.
You will be asked if you want to restore to default settings. Click
OK to restore settings to default configuration or click Cancel to
discard any changes.
Содержание DI-711 - Gateway
Страница 1: ...D Link DI 711 Wireless Broadband Router User s Manual Rev 07062005 ...
Страница 30: ...30 System Diagnostics ...
Страница 60: ...60 ...
