22
Using the Configuration Menu
Advanced >
IP Filter
Disabled IP Filter-
Select this option if
you do not want to use
IP filters.
Allow all computers
to access the Internet
except those listed
below-
Those in the list will be denied access to the Internet; all other computers will be allowed
access to the Internet.
Schedule-
IP-
Enter in the IP address range of the computers that you want the policy to apply to. If it
is only a single computer that you want the policy applied to, then enter the IP address of
that computer in the Start Source IP and leave the End Source IP blank.
Use IP (Internet Proto-
col) filters to allow or
deny computers ac-
cess to the Internet
based on their IP ad-
dress.
Deny all computers access to the Internet except those listed below-
Select this option to deny all computers access to the Internet except those that are
listed below. All other computers will be denied access to the Internet.
Port-
Enter in the port range of the TCP/UDP ports that you want the policy to apply to. If it is
only a single port that you want the policy applied to, then enter the port number in the
Start Port field and leave the End Port field blank. If you want to use all the ports, you
can leave the port range empty.
Enabled or Disabled-
Click
Enabled
to apply the filter policy or click
Disabled
to enter an inactive filter policy
(You can reactivate the policy later.)
Select
Always
, or choose
From
and enter the time period during which the IP filter policy
will be in effect.
