24
D-Link DHP-W310AV User Manual
Section 3 - Configuration
System
Save Settings To
Local Hard Drive:
Load Settings From
Local Hard Drive:
Restore to
Factory Default
Settings:
Reboot the
Device:
Clear Language
Pack:
Use this option to save the current DHP-
W310AV configuration settings to a file on
the computer you are using. Click the
Save
button. You will then see a file dialog where
you can select a location and file name for
the settings.
Use this option to load previously saved DHP-
W310AV configuration settings. Click
Browse
to find a previously saved configuration file.
Then, click the
Upload Settings
button to
transfer those settings to the DHP-W310AV.
This option will restore all configuration
settings back to the settings that were in effect at the time the DHP-W310AV was shipped from the factory. Any settings that
have not been saved will be lost, including any rules that you have created. If you would like to save the current DHP-W310AV
configuration settings, use the
Save
button above.
Click to reboot the DHP-W310AV.
Clears any language pack that is currently installed. For more about language packs, refer to “Firmware” on page 25.
This page lets you both save and delete settings on your DHP-W310AV.