DGS-3710 Series Layer 2 Managed Gigabit Switch Hardware Installation Guide
9
Chapter 1 Introduction
Switch Description
Features
Ports
Front-Panel Components
LED Indicators
Rear Panel Description
Side Panel Description
This manual describes the installation, maintenance, and configurations concerning the Switch.
Switch Description
D-Link's DGS-3710 Series switch is a high performance member of the D-Link switch family. Ranging from
10/100Mbps edge switches to core gigabit switches, the switch family has been future-proof designed to provide fault
tolerance, flexibility, port density, robust security and maximum throughput with a user-friendly management interface
for the networking professional
The Switch has a combination of 1000BASE-T ports and SFP ports that may be used in uplinking various network
devices to the Switch, including PCs, hubs and other switches to provide a gigabit Ethernet uplink in full-duplex mode.
The SFP (Small Form Factor Portable) combo ports are used with fiber-optical transceiver cabling in order to uplink
various other networking devices for a gigabit link that may span great distances. These SFP ports support full-duplex
transmissions and can be used with the following transceivers:
•
DEM-310GT (1000BASE-LX, Single-mode, 10km)
•
DEM-311GT (1000BASE-SX, Mutli-mode, 500m)
•
DEM-312GT2 (1000BASE-SX, Multi-mode, 2km)
•
DEM-314GT (1000BASE-LH, Single-mode, 50km)
•
DEM-315GT (1000BASE-ZX, Single-mode, 80km)
•
DEM-210 (100BASE-FX, Single-mode, 15km)
•
DEM-211 (100BASE-FX, Multi-mode, 2km)
WDM transceivers supported include:
•
DEM-330T (1000BASE-BX-D, Single-Mode, 10km, TX-1550/RX-1310nm)
•
DEM-330R (1000BASE-BX-U, Single-Mode, 10km, TX-1310/RX-1550nm)
•
DEM-331T (1000BASE-BX-D, Single-Mode, 40km, TX-1550/RX-1310nm)
•
DEM-331R (1000BASE-BX-U, Single-Mode, 40km, TX-1310/RX-1550nm)
•
DEM-220T (100BASE-BX-D, Single-Mode, 20km, TX-1550/RX-1310nm)
•
DEM-220R (100BASE-BX-U, Single-Mode, 20km TX-1310/RX-1550nm)