D-Link DGS-3710 Series Скачать руководство пользователя страница 30

Страница: 30 / 53

DGS-3710 Series Layer 2 Managed Gigabit Switch Hardware Installation Guide

Weight

3.25kg

EMI

CE Class A, FCC Class A, C-Tick Report, IC Report, BSMI.

Safety

UL, CB Report, CE LVD Report.

Green

•

Comply with RoHS 6.

•

All Gigabit ports support power saving, by Link Status and Energy Efficiency
Ethernet (EEE) known as IEEE 802.3az.

Performance

Feature

Detailed Description

Transmission Method

Store-and-forward

Packet Buffer

1MByte per device

Packet Filtering /

Forwarding Rate

Full-wire speed for all connections

1,488,095 pps per port (for 1000Mbps)

148,810 pps per port (100Mbps)

Wire speed

Wire speed operation on all FE/GE ports

Switching Capacity

24Gbps

64 Byte System Packet

Forwarding Rate

9.5 Million Packets Per Second

LED Indicators

Location

LED Indicative

Color

Status

Description

Per Device

Power (PWR)

Green

Solid Light

Power On.

Light off

Power Off.

System (SYS)

Green

Solid Light

System is running.

Blinking

System booting.

Alarm (ALM)

Red

Solid Light

When an alarm event has been detected.
When the temperature exceed the upper and
lower threshold.

Light off

When an alarm event has been cleared.
When the temperature is in the normal
threshold.

FAN

Red

Solid Light

When the system fan failed and/or the fan
module has been removed.

Light off

When all the fans are functioning properly.

Management Port

(MGMT) – SPD

Green/Amber

Solid Green

Secure connection to the MGMT port at
1000Mbps.

Solid Amber

Secure connection to the MGMT port at
100Mbps.

Light off

Secure connection to the MGMT port at
10Mbps; or link down.

Management Port

(MGMT) – ACT

Green

Solid Light

Port link up.

Blinking

When there is reception or transmission of
data occurring at Management port.

Light off

No link

Содержание DGS-3710 Series






















































Результаты поиска

Содержание DGS-3710 Series

Отзывы:

Бренды по названию

Популярные бренды

D-Link DGS-3710 Series, Руководство по установке оборудования

Результаты поиска

Содержание DGS-3710 Series

Отзывы:

Бренды по названию

Популярные бренды