DGS-3700-12/DGS-3700-12G Series Layer 2 Gigabit Ethernet Switch User Manual
212
the 15th byte.
•
16-31
– Enter a value in hex form to mask the packet from byte 16 to byte 31.
•
32-47
– Enter a value in hex form to mask the packet from byte 32 to byte 47.
•
48-63
– Enter a value in hex form to mask the packet from byte 48 to byte 63.
•
64-79
– Enter a value in hex form to mask the packet from byte 64 to byte 79.
Click
Apply
to set this entry in the Switch’s memory.
To view the settings of a previously correctly created profile, click the corresponding
Show Details
button on the
CPU
Access Profile List
window to view the following window:
Figure 6 - 36 CPU Access Profile Detail Information window for Packet Content
To establish the rule for a previously created CPU Access Profile:
To configure the Access Rules for Ethernet, open the
CPU
Access Profile List
window and click
Add/View Rules
for
an Ethernet entry. This will open the following window.
Figure 6 - 37 CPU Access Rule List window for Ethernet
To remove a previously created rule, click the corresponding
Delete Rules
button. To add a new Access Rule, click
the
Add Rule
button:
Figure 6 - 38 Add Access Rule window for Ethernet
To set the Access Rule for Ethernet, adjust the following parameters and click
Apply
.
Parameter Description
Access ID (1-100)
Type in a unique identifier number for this access. This value can be set from
1
to
100
.
