D-Link DGS-3308TG страница 13 Скачать руководство пользователя

Страница: 13 / 239

8-port Gigabit Ethernet Switch User’s Guide

installed. Many network segments display poor performance, but the Ethernet wire is only carrying a fraction of its total

traffic capacity. The problem is not the network, but the ability of the connected devices to utilize the full capacity of the

network. The DGS-3308 can eliminate network bottlenecks to high-traffic areas, and improve the utilization of the

network’s installed bandwidth.

The Functions of a Layer 3 Switch

Traditional routers, once the core components of large networks, became an obstacle to the migration toward next-

generation networks. Attempts to make software-based routers forward packets more quickly were inadequate.

A layer 3 switch does everything to a packet that a traditional router does:

•

Determines forwarding path based on Layer 3 information

•

Validates the integrity of the Layer 3 header via checksum

•

Verifies packet expiration and updates accordingly

•

Processes and responds to any optional information

•

Updates forwarding statistics in the Management Information Base

•

Applies security controls

A Layer 3 switch can be placed anywhere within a network core or backbone, easily and cost-effectively replacing the

traditional collapsed backbone router. The DGS-3308 Layer 3 switch communicates with a WAN router using a standard

Gigabit Ethernet or GBIC-based port. Multiple DGS-3308 switches can be linked via the Gigabit Ethernet ports.

Features

The DGS-3308 was designed for easy installation and high performance in an environment where traffic on the network

and the number of users increase continuously.

Switch features include:

Ports

•

Six 1000BASE-SX (SC-type fiber transceiver) for the DGS-3308FG or six 1000BASE-T (10/100/1000M

Fast/Gigabit Ethernet) for the DGS-3308TG.

•

Two GBIC-based Gigabit Ethernet ports.

•

Fully compliant with IEEE 802.3z.

•

Fully compliant with IEEE 802.3 10BASE-T, IEEE 802.3u 100BASE-TX, and IEEE 802.3ab 1000BASE-T (DGS-

3308TG only).

•

Support Full Duplex operations.

•

Supports auto-negotiation for 10M/100M/1000M speed (DGS-3308TG only).

•

IEEE 802.3x compliant Flow Control support for full duplex.

•

Supports Head of Line Blocking.

Содержание DGS-3308TG
















































































































































































































































Результаты поиска

Содержание DGS-3308TG

Отзывы:

Похожие инструкции для DGS-3308TG

Бренды по названию

Популярные бренды

D-Link DGS-3308TG, Руководство пользователя

Результаты поиска

Содержание DGS-3308TG

Отзывы:

Похожие инструкции для DGS-3308TG

Бренды по названию

Популярные бренды