D-Link DGS-3100 SERIES Скачать руководство пользователя страница 39 | Manualshive

Страница: 39 / 74

background image

DGS-3100 Series Gigabit Stackable Managed Switch Hardware Installation Guide

29

Booting the Device

To boot the switch, perform the following procedure:

1.

Ensure that the device console is connected to a VT100 terminal device or VT100 terminal emulator.

2.

Deactivate the AC power receptacle.

3.

Connect the device to the AC receptacle.

4.

Activate the AC power receptacle.

When the power is turned on with the local terminal already connected, the switch goes through

Power On Self Test

(POST).

POST runs every time the device is initialized and checks hardware components to determine if the device is fully
operational before completely booting. If a critical problem is detected, the program flow stops. If POST passes successfully,
a valid executable image is loaded into RAM. POST messages are displayed on the terminal and indicate test success or
failure.

As the switch boots, the bootup test first counts the device memory availability and then continues to boot.

The following screen is an example of the displayed POST.

------ Performing the Power-On Self Test (POST) ------

UART Channel Loopback Test........................PASS

Testing the System SDRAM..........................PASS

Boot1 Checksum Test...............................PASS

Boot2 Checksum Test...............................PASS

Flash Image Validation Test.......................PASS

BOOT Software Version

1.0.0.0 Built 01-Feb-2007 14:05:13

Network Switch based on 88E6218 with ARM946E-S.64MByte SDRAM.

I-Cache 8 KB. D-Cache 8 KB. Cache Enabled.

Autoboot in 2 seconds - press RETURN or Esc. to abort and enter prom.

The boot process runs approximately 30 seconds.

The auto-boot message that appears at the end of POST (see the last lines) indicates that no problems were encountered
during boot.

If the system boot is not interrupted by pressing <Esc> or <Enter>, the system continues operation by decompressing and
loading the code into RAM. The code starts running from RAM and the list of numbered system ports and the port states are
displayed. The following screen is an example configuration (Items such as addresses, versions, and dates may differ for
each device):

Preparing to decompress...

Decompressing SW from image-1

638000

OK

Running from RAM...

*********************************************************************

*** Running SW Ver. 1.2.0.6 Date 18-Feb-2007 Time 16:12:30 ***

*********************************************************************

HW version is 01.00.00

Base Mac address is

:

00:00:00:24:25:37

Dram size is: 64M bytes

Dram first block size is: 45056K bytes

Dram first PTR is: 0x1400000

Flash size is: 16M

01-Jan-2000 01:01:05 %CDB-I-LOADCONFIG: Loading running configuration.

01-Jan-2000 01:01:05 %CDB-I-LOADCONFIG: Loading startup configuration.

«
...
37
38
39
40
41
...
»

Содержание DGS-3100 SERIES











































































Отзывы:

Нет отзывов

Похожие инструкции для DGS-3100 SERIES

xStack DGS-3612G series

Бренд: D-Link Страницы: 546

xStack DGS-3400 Series

Бренд: D-Link Страницы: 326

xStack DGS-3612G series

Бренд: D-Link Страницы: 493

xStack DGS-3400 Series

Бренд: D-Link Страницы: 540

DXS-3326GSR - xStack Switch - Stackable

Бренд: D-Link Страницы: 354

Бренд: Eaton Страницы: 12

Бренд: Harman Kardon Страницы: 2

8271 Nways Ethernet LAN Switch

Бренд: IBM Страницы: 210

Бренд: Top View Страницы: 2

DL-DVI-MUX2-NT SERIES

Бренд: G&D Страницы: 76

Бренд: EtherWAN Страницы: 2

Link Power LPS2400-T1

Бренд: Inscape Data Страницы: 8

Бренд: Gembird Страницы: 2

STI Echotel 919

Бренд: Magnetrol Страницы: 12

Бренд: Pilz Страницы: 8

Бренд: Jerguson Страницы: 16

Бренд: cable matters Страницы: 12

Бренд: EtherWAN Страницы: 239

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды