D-Link DGS-1024D - Switch, Быстрое руководство по установке

Страница: 3 / 16

11
E
N
G
LI
S
H
About This Guide
The D-Link DGS-1016D/1024D 16/24-Port Gigabit
Desktop Switch is a stand-alone plug-and-play
device. This Quick Installation Guide gives step-by-
step instructions for setting up the device. The model
you have purchased may appear slightly different
from the images shown in this guide. For more
detailed information about the switch, installation
process, making network connections, and technical
specifications, please refer to the User Manual or visit
http://www.dlink.com
Package Contents
These are the items included with your purchase:
• D-Link DGS-1016D 16-Port or DGS-1024D
24-Port 10/100/1000BASE-T Gigabit
Ethernet Switch
• AC power cord
• Four rubber feet
• Screws and two mounting brackets
• Quick Install Guide
• Power cord retainer
• Tie wrap
If any of the above items are missing, please contact
your D-Link reseller for replacement.
Before Connecting to the
Network
As with any electronic device, you should place
the equipment where it will not be subjected to
extreme temperatures, humidity, or electromagnetic
interference. Specifically, the site you select should
meet the following requirements:
A. Install the DGS-1016D / DGS-1024D in a fairly
cool and dry place. See Technical Specifications
page in the manual for the acceptable operation
temperature and humidity ranges.
B. Install the switch in a site free from vibration, dust,
and direct sunlight.
C. Leave at least 10cm of space on the left and right
hand side of the switch for ventilation.
D. Visually inspect the power cable and ensure that
it is firmly inserted into a suitable power outlet.
Switch Installation
The DGS-1016D/1024D can easily be mounted in an
EIA standard size 19-inch rack which can be placed
in a wiring closet with other equipment or placed on a
desktop or shelf.
Desktop or Shelf Installation
When installing the switch on a desktop or shelf, use
the rubber feet provided. Position and apply the rubber
feet to the bottom corners of the DGS-1016D/1024D
switch.
Rack Installation
To install in a rack, attach the mounting brackets
to the switch’s side panels (one on each side) and
secure them with the screws provided. Then, use the
hardware provided with the equipment rack to mount
the switch in the rack.