background image

 

    

15

 

 
 
Subject to the terms and conditions set forth herein, D-Link Systems, Inc. (“D-Link”) provides this Limited warranty for 
its product only to the person or entity that originally purchased the product from: 
 

• 

D-Link or its authorized reseller or distributor and 

• 

Products purchased and delivered within the fifty states of the United States, the District of Columbia, U.S. 

Possessions or Protectorates, U.S. Military Installations, addresses with an APO or FPO.  

 

Limited Warranty:

   

D-Link warrants that the hardware portion of the D-Link products described below will be free 

from material defects in workmanship and materials from the date of original retail purchase of the product, for the 
period set forth below applicable to the product type (“Warranty Period”), except as otherwise stated herein.  

 

Limited Lifetime Warranty for the Product(s) is defined as follows: 
 

• 

Hardware for as long as the original customer/end user owns the product, or five years after product 

discontinuance, whichever occurs first (excluding power supplies and fans) 

• 

Power Supplies and Fans Three (3) Year 

• 

Spare parts and spare kits Ninety (90) days 

 
D-Link’s sole obligation shall be to repair or replace the defective Hardware during the Warranty Period at no charge 
to the original owner or to refund at D-Link’s sole discretion.  Such repair or replacement will be rendered by D-Link at 
an Authorized D-Link Service Office.  The replacement Hardware need not be new or have an identical make, model 
or part.  D-Link may in its sole discretion replace the defective Hardware (or any part thereof) with any reconditioned 
product that D-Link reasonably determines is substantially equivalent (or superior) in all material respects to the 
defective Hardware.  Repaired or replacement Hardware will be warranted for the remainder of the original Warranty 
Period from the date of original retail purchase.  If a material defect is incapable of correction, or if D-Link determines 
in its sole discretion that it is not practical to repair or replace the defective Hardware, the price paid by the original 
purchaser for the defective Hardware will be refunded by D-Link upon return to D-Link of the defective Hardware.  All 
Hardware (or part thereof) that is replaced by D-Link, or for which the purchase price is refunded, shall become the 
property of D-Link upon replacement or refund. 

 
Limited Software Warranty:  

D-Link warrants that the software portion of the product (“Software”) will substantially 

conform to D-Link’s then current functional specifications for the Software, as set forth in the applicable 
documentation, from the date of original retail purchase of the Software for a period of ninety (90) days (“Warranty 
Period”), provided that the Software is properly installed on approved hardware and operated as contemplated in its 
documentation. D-Link further warrants that, during the Warranty Period, the magnetic media on which D-Link 
delivers the Software will be free of physical defects.  D-Link’s sole obligation shall be to replace the non-conforming 
Software (or defective media) with software that substantially conforms to D-Link’s functional specifications for the 
Software or to refund at D-Link’s sole discretion.  Except as otherwise agreed by D-Link in writing, the replacement 
Software is provided only to the original licensee, and is subject to the terms and conditions of the license granted by 
D-Link for the Software.  Software will be warranted for the remainder of the original Warranty Period from the date or 
original retail purchase.  If a material non-conformance is incapable of correction, or if D-Link determines in its sole 
discretion that it is not practical to replace the non-conforming Software, the price paid by the original licensee for the 
non-conforming Software will be refunded by D-Link; provided that the non-conforming Software (and all copies 
thereof) is first returned to D-Link.  The license granted respecting any Software for which a refund is given 
automatically terminates. 

 

Non-Applicability of Warranty:  

The Limited Warranty provided hereunder for hardware and software of D-Link's 

products will not be applied to and does not cover any refurbished product and any product purchased through the 
inventory clearance or liquidation sale or other sales in which D-Link, the sellers, or the liquidators expressly disclaim 
their warranty obligation pertaining to the product and in that case, the product is being sold "As-Is" without any 
warranty whatsoever including, without limitation, the Limited Warranty as described herein, notwithstanding anything 
stated herein to the contrary.

  

 

 
Submitting A Claim

:  The customer shall return the product to the original purchase point based on its return policy.  

In case the return policy period has expired and the product is within warranty, the customer shall submit a claim to 
D-Link as outlined below: 
 
  

• 

The customer must submit with the product as part of the claim a written description of the Hardware defect 

or Software nonconformance in sufficient detail to allow D-Link to confirm the same.  

• 

The original product owner must obtain a Return Material Authorization (“RMA”) number from the 

Authorized D-Link Service Office and, if requested, provide written proof of purchase of the product (such as a 
copy of the dated purchase invoice for the product) before the warranty service is provided. 

• 

After an RMA number is issued, the defective product must be packaged securely in the original or other 

suitable shipping package to ensure that it will not be damaged in transit, and the RMA number must be 
prominently marked on the outside of the package.  Do not include any manuals or accessories in the shipping 
package.  D-Link will only replace the defective portion of the Product and will not ship back any accessories. 

Содержание DGS-1008D - Switch

































Отзывы: