D-Link DG-102SP Скачать руководство пользователя страница 14

Страница: 14 / 71

The items on this window are described below:

Using Web-Based Management

Device Information

Device Type:

This displays the model name of this device.

MAC Address:

This displays the MAC address of this device.

Boot PROM Version:

This displays the version number of the device’s

startup code.

Firmware Version:

This displays the version number of the device’s

runtime code.

DSP Version:

This displays the Digital Signal Processor version, if any.

Serial Number:

This field is for a user-determined identification number.

System Name:

This is a user-defined name for this device.

System Location:

This is a user-defined physical location of the device.

System Contact:

This is user-defined contact information for the person

or department responsible for the maintenance of this device.

Country Code:

This is a user-defined country code for this device.

<0:USA (Default), 1:Japan, 2:Hong Kong, 3:Sweden, 4:China>

Web Port Number:

This is a user-defined web port number.

Life Line Status:

Enables or disables the Lifeline function.

Life Line Prefix Digit:

This is a user-defined Lifeline prefixed key for this

device (Default is “#” key).

Click on the

Save

button at the bottom right of the window to save the settings.

Содержание DG-102SP








































































Результаты поиска

Содержание DG-102SP

Отзывы:

D-Link DG-102SP, Руководство пользователя, Страница: 14 / 71

Результаты поиска

Содержание DG-102SP

Отзывы: