D-Link DFL- 2500 Скачать руководство пользователя

Страница: 146 / 213

3.32. IPRuleSet

Description

An IP Rule Set is a self-contained set of IP Rules. Default action is Drop.

Properties

Name

A name to uniquely identify this IPRuleSet. (Identifier)

Comments

Text describing the current object. (Optional)

3.32.1. IPRule

Description

An IP rule specifies what action to perform on network traffic that matches the specified filter criter-
ia.

Properties

Name

Specifies a symbolic name for the rule. (Optional)

Action

Reject, Drop, FwdFast, Allow, NAT, SAT ,SLB_SAT,
GOTO or RETURN.

SourceInterface

Specifies the name of the receiving interface to be compared
to the received packet.

SourceNetwork

Specifies the sender span of IP addresses to be compared to
the received packet.

DestinationInterface

Specifies the the destination interface to be compared to the
received packet.

DestinationNetwork

Specifies the span of IP addresses to be compared to the des-
tination IP of the received packet.

Service

Specifies a service that will be used as a filter parameter when
matching traffic with this rule.

Schedule

By adding a schedule to a rule, the security gateway will only
allow that rule to trigger at those designated times. (Optional)

NATAction

Specify sender address or Use interface address. (Default:
UseInterfaceAddress)

NATSenderAddress

Specifies which sender address will be used.

NATPool

Specifies which sender address will be used.

SATTranslate

Specifies whether to translate source IP or destination IP.
(Default: DestinationIP)

SATTranslateToIP

Translate to this IP address.

3.32. IPRuleSet

Chapter 3. Configuration Reference

146

Содержание DFL- 2500






















































































































































































































Результаты поиска

Содержание DFL- 2500

Отзывы:

Похожие инструкции для DFL- 2500

Бренды по названию

Популярные бренды

D-Link DFL- 2500, Справочное руководство CLI

Результаты поиска

Содержание DFL- 2500

Отзывы:

Похожие инструкции для DFL- 2500

Бренды по названию

Популярные бренды