D-Link DFL- 2500 Скачать руководство пользователя

Страница: 130 / 213

3.27. IGMPRule

Description

An IGMP rule specifies how to handle inbound IGMP reports and outbound IGMP queries.

Properties

Index

The index of the object, starting at 1. (Identifier)

Name

Specifies a symbolic name for the rule. (Optional)

Type

The type of IGMP messages the rule applies to. (Default: Report)

Action

Drop, Snoop, Proxy or PIM. (Default: Drop)

SourceInterface

Specifies the name of the receiving interface to be compared to
the received packet.

SourceNetwork

Specifies the sender span of IP addresses to be compared to the re-
ceived packet.

DestinationInterface

Specifies the the destination interface to be compared to the re-
ceived packet. (Default: core)

MulticastGroup

Specifies the multicast group to be compared to the received pack-
et.

MulticastSource

Specifies the multicast source to be compared to the received
packet.

RelayInterface

Specifies the interface via which to relay IGMP messages.

TranslateMGroup

Translate the multicast group for packets matching this rule.
(Default: No)

GrpAllToOne

Rewrite all multicast groups to a single IP. (Default: No)

NewGrpIP

Translate the multicast group to this address.

TranslateMSource

Translate the multicast source for packets matching this rule.
(Default: No)

SrcAllToOne

Rewrite all multicast sources to a single IP. (Default: No)

NewSrcIP

Translate the multicast source to this address.

Filter

Pass IGMP data not matching this rule to the next rule. (Default:
Yes)

LogEnabled

Enable logging. (Default: Yes)

LogSeverity

Specifies with what severity log events will be sent to the spe-
cified log receivers. (Default: Default)

Comments

Text describing the current object. (Optional)

3.27. IGMPRule

Chapter 3. Configuration Reference

130

Содержание DFL- 2500






















































































































































































































Результаты поиска

Содержание DFL- 2500

Отзывы:

Похожие инструкции для DFL- 2500

Бренды по названию

Популярные бренды

D-Link DFL- 2500, Справочное руководство CLI

Результаты поиска

Содержание DFL- 2500

Отзывы:

Похожие инструкции для DFL- 2500

Бренды по названию

Популярные бренды