D-Link DFL-210 - NetDefend - Security Appliance, Справочное руководство CLI

Страница: 59 / 213

pcapdump -write [<interface(s)>] [-filename=<String>]
Write the captured packets to disk.
pcapdump -wipe
Remove all captured packets from memory.
pcapdump -cleanup
Remove all captured packets, release capture mode and delete all written capture files from disk.
Options
-cleanup Remove all captured packets, release capture mode and delete
all written capture files from disk.
-count=<value> Number of packets to capture.
-destport=<0...65535> Destination TCP/UDP port filter.
-eth=<Ethernet Address>
Ethernet address filter.
-ethdest=<Ethernet Address> Ethernet destination address filter.
-ethsrc=<Ethernet Address> Ethernet source address filter.
-filename=<String> Filename for capture file.
-icmp ICMP filter.
-ip=<IP4 Address> IP address filter.
-ipdest=<IP4 Address> Destination IP address filter.
-ipsrc=<IP4 Address> Source IP address filter.
-out
Realtime packet brief dumped to console.
-out-nocap Unbuffered (not stored in memory) realtime packet brief
dumped to console.
-port=<0...65535> TCP/UDP port filter.
-promisc Set iface in promiscuous mode.
-proto=<0...255>
IP protocol filter.
-show Show a captured packets brief.
-size=<value> Size (kb) of buffer to store captured packets in memory
(default 512kb).
-snaplen=<value> Maximum length of each packet to capture.
-srcport=<0...65535> Source TCP/UDP port filter.
-start Start capture.
-status Show capture status.
2.2.50. pcapdump Chapter 2. Command Reference
59