9
Group (Hub) Configuration
Clicking Fault
→
Group/Port Control
→
[Hub ID] will show the current configuration
information of the Hub.
The information is described as follows:
♦
Serial Number
This is a unique hardware serial number of the Hub.
♦
Description
This is the product ID.
♦
Slot 1/ Slot 2 Type
These indicate the type of module, if present, in the back-slot
of the Hub.
♦
Repeater Type
Product information of the Hub.
♦
Group Role
The role of the Hub within the stack, either primary-master,
backup-master, or slave.
♦
Hardware Revision
The version of the repeater hardware board used in this
Hub.
♦
Status
Tells whether the Hub is
up
or
down
.
♦
Last Operation Status Change
Time of the last status change for the Hub. A
status change occurs when the Hub goes online or off-line.
