manualshive.com logo in svg

D-Link DES-5200, Руководство пользователя

Поделиться
Скачать
D-Link DES-5200 Скачать руководство пользователя страница 98

Fast Ethernet Switching System User’s Guide

Managing the DES-5200

91

Number of broadcast frames received.

Rx Good Oversized

Number of good oversized frames received.

Rx Error Oversized

Number of good oversized frames with errors (FCS, Alignment)

Rx Good Undersized

Number of good undersized frames received.

Rx Error Undersized

Number of undersized frames received with errors.

Rx64

Number of frames (including frames with errors) that were 64 bytes long.

Rx65 to 127

Number of frames (including frames with errors) 65 to 127 bytes long.

Rx128 to 255

Number of frames (including frames with errors) 128 to 255 bytes long.

Rx256 to 511

Number of frames (including frames with errors) 256 to 511 bytes long.

Rx512 to 1023

Number of frames (including frames with errors) 512 to 1023 bytes long.

Rx1024 to 1518

Number of frames (including frames with errors) 1024 to 1518 bytes long.

Rx Disc Mem Full

Number of good frames that were discarded because the memory was full.

Содержание DES-5200































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды